Camera Angle

[MurdocBr]

Exemple of the pic:



You must put this code in .camPov

Code: Select all

type: a camTrackCS { Offset -21.990000 -0.100000 45.090000 CollideType 2 MinMaxOn 1 TrackBreak 1 MinAppXZPos 0.300000 MaxAppXZPos 0.6640000 MinSpeed 5.000000 MaxSpeed 35.000000 AppInc 15.000000 AppDec 10.000000 MinHardSteer 0.800000 DriftDelay 0.300000 VertOffset 0.200000 FrontRate 0.550000 RearRate 0.500000 FlipDelay 0.500000 SteerOn 0 SteerMin 0.500000 SteerAmt 3.500000 HillMin -0.560000 HillMax 0.560000 HillLerp 0.050000 ReverseOn -1 RevDelay 2.000000 RevOnApp 2.000000 RevOffApp 4.000000 ApproachOn 0 AppAppOn 0 AppRot 60.000000 AppXRot 10.000000 AppYPos 5.000000 AppXZPos 5.000000 AppApp 0.700000 AppRotMin 0.010000 AppPosMin 0.250000 LookAbove 11.000000 TrackTo 8.000000 2.054000 -17.500000 MaxDist 8.50000 MinDist 1.430000 LookAt 0.000000 BlendTime 1.200000 BlendGoal 1.000000 CameraFOV 5.600003 CameraNear 1.00000 CameraFar 1600.00000 }

[sajmon14]

I tested it, nice but sometimes gets annoying view if hit something

[StanOfGB]

Only works for LOD VL?

[leo98mm2]

Where is the .camPov file?

[MurdocBr]

Stan: nope,

leo: look this tutorial from zac https://www.mm2x.com/modules.php?name=Forum ... pic&t=3473

[Franch88]

This kind of view 3D parallel view is used in some HK buses, like your example screenshot shows too. You can get its file if the bus that uses it isn't locked. Precisely, the files to change or edit are "*_near.camPov" or "*_far.camPov".
Not a good camera view for the driving because it's fixed, and the 3D parallel view looks pretty weird.